GM-38 End Forming Machine is a kind of high efficiency, full-auto machine. It is controlled by oil and electricity at the same time. It can reduce, enlarge or blunt pipes. The processed shapes, includes concave-convex section, long, flat, square, enlargement, slanting, V-shaped, open slot and others. According to the customers' choice, the die can be changed.
1. Construction
Bed used welding pieces, imports of hydraulic systems and electric control three of fabric to complete. The electric parts and hydraulic are imported.
2. Design Principle
It is controlled by PLC, driven by hydraulic. It is simple to change the dies.
3. Major Performance.
It adopts PLC control. It is simple to operate, with steady precision, high speed and complete function.
5. Configuration
A) Hydraulic systems are imported
Hydraulic motor: Made in Taiwan
Hydraulic pump: Made in Taiwan
Hydraulic valve: Made in Taiwan
Oil way board: Made in Taiwan
Oil cylinder: Made in Taiwan
Double-layer laminated steel tubing used legitimately imported Taiwan
B) Electronic parts
Button Switch: Made in Taiwan
Photoelectric switches and Electrical: Made in Taiwan
PLC: Made in Taiwan
| Main technical parameters | unit | GM-DB-38B |
| Max pipe bending capacity | mm | 38×2 |
| Bending radius region | mm | 38~220 |
| Max bending angle region | ° | 185° |
| Centre distance of double head | mm | 170-1450 |
| Main motor power | kw | 4 |
| Bending speed | °/sec | 50 |
| Oil flow productivity of the pump | L | 17 |
| Oil system pressure | mpa | 14 |
| Clamping traverse | mm | 50 |
| Pieces of one time bending | piece | 3 |
| Capacity of oil tank | L | 120 |
| Machine dimension | mm | 2700×900×1350 |
| Machine weight | kg | 2200 |
