Views: 0 Author: Site Editor Publish Time: 2021-07-23 Origin: Site
The pipe bender is an extremely common piece of industrial equipment that have been developed over many decades and it is a mechanical product that will combines Chinese and American technology. Today, we gives a brief introduction into the pipe bender, about its applications along with operational considerations will be mentioned in this posting.
The main function regarding pipe bending machine.
The water line bending machine applications.
How to control a pipe bender?
Folded pipes
Folding pipe could be the biggest function of that pipe bender, our pipe bender uses hydraulic, electric along with other ways to bend the actual steel pipe bending electronic equipment includes a reasonable structure, convenient operation along with other characteristics.
Jack
Jack is mainly used in factories, mines, transportation as well as other departments as vehicle repair along with lifting, support and alternative work. In the technique of placing the jack, maintain your load centre of gravity distinct action and the jack axis, jacking process to counteract the risk of skewed, tilted jack due to the jack foundation or load level displacement.
Obviously, the pipe bender may also be used as a jack in combination with bending pipes. The tube bender series includes a VDU touch screen operator panel that allows various bending data that they are entered, stored and exhibited in sequence. The high efficiency and low noise a higher standard the bending machines are with the many industrial innovations who have taken place.
The tube bender has a wide range of applications, the main application is aerospace, automotive, locomotive, motorbike, ship, petrochemical, electrical power, natural gas, nuclear business, boilers, vehicles, sporting goods as well as other pipe fittings bending control equipment. Because of the easy operation and the deficit of any chemical reaction, pipe benders are located in any large developing industry.
Regularisation regarding tube shapes
Design and fall into line the tube to avoid above 180 ° arc. Because too large an arc not exclusively makes the tooling ungainly, but also limited because of the size of the bender machines.
Control the bending radius
The type and model of the bending radius of the conduit determines the size belonging to the resistance of the avenue when bending and forming. Therefore, the general choice of bending die R value for your pipe diameter of 2-3 periods as good.
Control associated with bending and forming velocity
Bending and forming speed can not be too fast or very slow. Speed is as well fast, easy to cause the flattening from the bent part of that conduit, resulting in the pulling and cracking in the conduit. Conversely, if the rate is too slow, you can cause wrinkling of your conduit and compression prohibit slippage, and the large diameter with the pipe is easy to form the sagging of the bent section of the conduit, thus destroying the pipe.
Note previous to operation
The tube bender has to be well grounded, when promoting and unplugging connectors, can not pull the wire or cable to forestall welding pull off.
The above include the main operating steps of the tube bender, we need to regularly add oil towards chain and other slipping parts, which is to extend the service life with the bender. In addition, the slicer should be kept clean, special attention should be paid on the clamping block, slider and various sliding groove should n't have foreign objects, in the cleaning and maintenance with the tube bender must be disconnected from your power supply.
