Can a double head twisting machine work

The double head bending machine is a type of pipe bending machine that has a new appearance and higher work efficiency. However, a lot of people are unaware of the suitable operation and workings belonging to the double head bending equipment. In this article, an extensive analysis of the double head bending machine can be presented, and the application and operating notes from the double head bending machines are described.

• The working process of double head bending equipment.
  

• What's a double head bending machine used intended for?

• What are the steps for operating a two times head bending machine?

The working means of double head bending machine.

The double head bending machine is often a CNC-controlled, easy-to-operate, and flexible tube bending machine. Comparable to other bending machines, the bending machine works on the similar principle, with a high-pressure oil pipe fed on the working cylinder, where the high-pressure acrylic pushes the plunger inside the working cylinder, generating thrust and bending the pipe over the bending part.

What’s some sort of double head bending machines used for?

The 2 bottle head bending machine features many applications in electric engineering, aerospace, automotive, locomotive, motorbike, ship maintenance, petrochemical, gas many other fields. Our double head bending machines have a robust and deformation-resistant bed structure and so are suitable for bending and folding many materials, such as metal, stainless steel, aluminium, plus copper.

What are your precautions for operating any double head bending device?

• Checking pressure values

  Be aware of adjusting the position of the components of the two bottle head bending machine plus the angular requirements, so the inverted die compression hot water tank can tighten the straightener pipe. When starting the oil pump evaluate the bender's system pressure value situation. Too high a pressure will bring on damage to the bender's hydraulic components all of which also consume too a lot power. Too low a pressure value will lead to abnormal start-up and impact the operation. Therefore, we recommend adjusting the pressure with a solenoid relief valve in order that the system pressure reaches the necessary working pressure, which is usually no higher than 12. 5Mpa.

• Determining the twisting and forming speed

  Bending and forming speeds which are too fast can easily end in flattening of the bent portion of the conduit and failure to realize the required roundness, producing pulling and cracking on the conduit. At the identical time, the speed is usually too slow, easy for you to cause the catheter wrinkling along with compression block slippage. We advise that the bending speed in the conduit to determine the utmost bending speed of the equipment 20%-40% is appropriate. And double-headed bender on both sides in the speed control respectively, that requires attention.

These will be the considerations for operating any double-ended pipe bender, besides those mentioned above. The device should be kept clean, special attention should be paid to the clamping block, slider and another sliding groove ought not have foreign objects. Regularly add oil into the chain and other slipping parts, which is and also to extend the working life in the double-ended bender. In addition to the, the electrical box from the double-headed bender must be slipped into a ventilated place, and it's also prohibited to work with dust and corrosive gas.