So how exactly does a double head bending machine work

The double head bending machine is a kind of pipe bending machine that has a new appearance and huge work efficiency. However, lots of people are unaware of the specific operation and workings in the double head bending machine. In this article, an intensive analysis of the double head bending machine is actually presented, and the application and operating notes of the double head bending unit are described.

• The working process of double head bending machine.

• What's a double scalp bending machine used to get?

• What are the safeguards for operating a two times head bending machine?

The working technique of double head bending device.

The double head bending machine is really a CNC-controlled, easy-to-operate, and adaptable tube bending machine. Much like other bending machines, the bending machine works using a similar principle, with a high-pressure oil pipe fed into your working cylinder, where the high-pressure petrol pushes the plunger inside the working cylinder, generating thrust and bending the pipe in the bending part.

What's your double head bending equipment used for?

The 2 bottle head bending machine provides many applications in electro-mechanical engineering, aerospace, automotive, train engine, motorbike, ship maintenance, petrochemical, gas and several other fields. Our double head bending machines use a robust and deformation-resistant bed structure so are suitable for bending and folding a wide range of materials, such as metallic, stainless steel, aluminium, and copper.

What are the precautions for operating your double head bending appliance?

• Checking pressure values

  Take note of adjusting the position on the components of the two bottle head bending machine along with the angular requirements, so how the inverted die compression hot water tank can tighten the metal pipe. When starting the oil pump evaluate the bender's system pressure value situation. Too high a pressure will produce damage to the bender's hydraulic components but will also consume too a lot power. Too low a pressure value will cause abnormal start-up and affect the operation. Therefore, we recommend adjusting the pressure using a solenoid relief valve to ensure that the system pressure reaches the specified working pressure, which is normally no higher than 16. 5Mpa.

• Determining the bending and forming speed

  Bending and forming speeds which can be too fast can easily bring about flattening of the bent component to the conduit and failure to obtain the required roundness, contributing to pulling and cracking in the conduit. At the exact same time, the speed can be too slow, easy to help cause the catheter wrinkling as well as compression block slippage. We advise that the bending speed belonging to the conduit to determine the uppermost level of bending speed of the device 20%-40% is appropriate. And double-headed bender on both sides of the speed control respectively, which requires attention.

These are the considerations for operating a new double-ended pipe bender, along with those mentioned above. The device should be kept wash, special attention should be paid for the clamping block, slider and another sliding groove ought not have foreign objects. Regularly add oil towards the chain and other sliding parts, which is and to extend the working life on the double-ended bender. In addition for this, the electrical box of the double-headed bender must be put in a ventilated place, which is prohibited to work inside dust and corrosive unwanted gas.